|
|
|
| |
How is FabRoc™ different from other heat technology in the marketplace?
FabRoc™ is virtually indestructible. This rubber-like structure is flexible enough to be configured
into almost any shape. Freezing temperatures have no effect on the flexibility of FabRoc™ making it ideal for heated clothing and suitable for a broad range of other commercial
applications.
Unlike wire-based or carbon fiber heating systems, FabRoc™ continues to operate even if it is
slit or torn, with NO POSSIBILITY OF SHORT CIRCUITING with normal use. Operating from a low voltage
means that heating systems for light users can be powered by rechargeable batteries. The
weight of these battery packs (no heavier than a modern mobile phone) makes heated gear and heated clothing by exo² ideal for portable use.
FabRoc™ is:
- Intrinsically safe (due to the PTC properties and cannot overheat)
- Inert (resistant to most chemicals making it ideal for use in extreme environments)
- Energy Efficient (converting over 98% of electrical energy into heat)
- Lightweight (yielding virtually unlimited applications)
- Waterproof and Windproof
- Crushproof and Stretchable (with up to 200% elongation before rupture, and can even be backed by netting to provide additional strength if required).
How does FabRoc™ heat products without wires?
Most heated products or heated clothing have historically used wires to create and distribute heat throughout the product. Safety concerns, comfort concerns and reliability issues have plagued these wiring systems throughout the years. exo² uses a revolutionary new material called FabRoc™. FabRoc™ is integrated into the material of your heated product providing a uniform distribution of heat where you need it most with no risk of hot spots, short circuiting, etc. when used normally.
Do current exo² products have to be plugged in to work?
No. The current line of exo² heated products with FabRoc™ technology (except the StormShield Heated Motorcycle Gloves) can also be heated by small lithium ion batteries, the same batteries used to power most mobile phones today. However, most all exo² heated products can also be connected to a 12 volt battery system, plugged into a vehicle's accessory outlet, etc. Due to the extremely flexible applications of FabRoc™, several industrial and commercial use items that are under development will be powered via converted mains supply current.
How long will exo² products stay heated before the portable Power Packs need to be recharged?
Depending on the product and ambient temperature, exo² Power Packs typically maintain their charge for approximately 3 hours. Much like a mobile phone, they will need to be charged for 2-3 hours when the battery is depleted. There is no limit to the duration of warmth when exo²'s heated gear is directly connected to a power unit battery or via a 12v accessory socket power cord.
What are the advantages of FabRoc™ technology?
FabRoc™ is intrinsically safe.
FabRoc™ uniformly heats a large area without the risk of hot spots.
FabRoc™ is thin and lightweight.
FabRoc™ is waterproof and windproof.
FabRoc™ is well-built and crushproof.
FabRoc™ is completely customizable.
Fabroc’s™ flexible design and elasticity makes it moldable to any shape, size or product!
Can I wash clothing made with FabRoc™?
Yes – the lithium-ion batteries used to heat exo² products can be easily removed, allowing you to wash these garments like other similar items you may presently own. Please be sure to following the specific washing instructions for each garment as outlined in the User Instructions
provided with each item.
Is FabRoc™ safe?
Absolutely! FabRoc™ is intrinsically safe because it conducts heat uniformly throughout the fabric and does not use wires which can short circuit or overheat.
Where can I buy exo² gear?
You may but direct form exo² The Heat Inside via www.exo2theheatinside.com/store or by calling our sales department at 1-877-exo2-HEAT (877-396-2432). You may also purchase exo² gear through any authorized exo² retailer, a list of which can be found on our website. exo² distributes heated motorcycle clothing to over 17,000 motorcycle dealers in the US and Canada exclusively through Parts Unlimited and Drag Specialties (US) and Motovan Corporation (Canada).
Are exo² items made in children’s sizes?
Please be sure to follow carefully our sizing instructions when selecting your items. Most products are available in XS to XXXL sizes.
What is FabRoc™ made of?
FabRoc™ is made of a specially blended, unique polymer-based material that is lightweight, waterproof, windproof, crushproof and stretchable.
What products will exo² develop in the future?
Due to the incredible qualities of FabRoc™ the possibilities are virtually endless. In addition to our current range, exo² has many more products/concepts in various stages of R&D and we are workinng with other manufacturers to integrate our heat technology into their fine products. Look especially for new products in the medical and sporting fields later in 2008 and into 2009. With over 40 additional items “on the drawing board”, we look forward to providing a variety of unique and beneficial heated products to consumers worldwide for many coming years.
I have an idea for a new heated product, can I submit that idea to exo²?
Certainly. We would love to hear from our customers about new ideas. In fact, this is typically the initial response we receive when demonstrating the technology to people for the first time. If you have an idea or a product that is ready to be heated, please contact us to let us know.
What are the differences (other than the sleeves) between the StormWalker Jacket
and the StormWalker Vest?
Both StormWalker products are exactly the same other than the Jacket’s zip-off
sleeves option. Both garments heat to the same specifications (122°), have heated
pockets and feature the AirXtream outer fabric.
Can I buy the StormWalker Vest and later buy the sleeves?
No. The StormWalker Jacket is specially made to accommodate this feature.
What parts of the StormWalker Vest/Jacket are heated?
Our StormWalker heated clothing collection provides heat to the lower back/kidney area via a
contiguous FabRoc™ panel specially designed and formulated for this
application. The less than 1mm thick heat technology panel heats evenly to an average
temperature of 122° and self regulates based on the ambient temperature, your
body temperature, etc. StormWalker products also have heated pockets to provide
relief and comfort when bulky gloves are not desired or cannot be worn.
What's the difference between the StormRider Bodywarmer and the StormWalker
Vest?
The StormRider Bodywarmer is the ultimate heated clothing garment for extreme users. The BodyWarmer provides heat to the chest, upper back and lower back areas
to fight against the wind and chill of riding at highway speeds. The lining of the
StormRider is thicker than the StormWalker heated vest and jacket does not sport a collar. The
StormWalker is intended for moderate users and is often used by passengers. It is noticeably thinner than the
StormRider, has a collar, and heats both the lower back/kidney area and pockets.
Is there a difference in how the StormRider operates when connected to a
motorcycle vs. use with a portable Power Pack?
Yes. When direct-connected to a motorcycle, ATV, etc. both the right and left
chest panels are heated as well as the upper and lower back/kidney areas. When using the
portable Power Pack, only the lower back/kidney panel is heated, similar to that of the
StormWalker collection.
How many levels of heat exist for the Vest/Jacket/Bodywarmer? Does this change
when powered by the Power Pack?
Because FabRoc™ is a smart technology (exhibiting a positive temperature
coefficient) and self regulates, temperature controllers are not required. When the
optional StormRider Controller is used, nine settings are available for comfort
when a long ride exposes you to fluctuating external temperatures.
Where are the temperature controllers on the Vest/Jacket/Bodywarmer?
Because FabRoc™ is a smart technology and self regulates, temperature
controllers are not required. The heating element in each garment is specially
formulated so that comfort is achieved and maintained in conjunction with the
garment design and intended purpose. Quite simply, controllers cannot outlast
our FabRoc™ heating system. Our design and technology ensures that you will
continue to feel “The Heat Inside” for decades to come.
Why is the StormRider Bodywarmer more expensive?
The StormRider Bodywarmer cost more to produce, with four times the quantity
of Fabroc™ and more insulation. All of our vests are made with the same
technology and expert craftsmanship but provide different options to a wide range of users.
My HeatSole Heated Insoles do not appear to get hot. Is this intended?
Yes. It is normal that for the first few moments after inserting the HeatSoles that you feel little difference. This is primarily because HeatSoles are typically installed in the shoe or boot before one goes outdoors and before the feet become cold. The objective of the HeatSole is not to make the feet hot but rather to prevent them from being cold. If your feet are too hot, they will sweat, creating more problems than just your cold toes. Maintaining a temperature that is consistent with your indoor ‘in-shoe’ temperature is our goal. When you realize that your feet are not cold, this is when you have experienced the design and engineering of the HeatSole Heated Insole.
Can my vest, jacket or back support be washed in a washing machine?
Yes. However, for the best long term performance we 'recommend' that the HeatWave, StormRider and StormWalker be hand washed in pure soap flakes or a non-biological soap powder. exo² products can be washed in a washing machine but hand washing is recommended to enhance longevity of the item. The reason for suggesting non-biological soap powder is because of the breathability of the AirXtream® fabric will eventually be adversely affected by biological powders. The FabRoc™ polymer is not affected by the manner in which a garment is washed or the detergent type used.
|
| |
| |
| |
|
